LENS BOARD

eight made, fitting lenses on. 2 of the prototypes will be sharing lenses, with interchangeable built into it

FOCUS TRAIN

Constructing; call this focus train, still work in progress, it is the focusing mechanism for prototype #3; reused kamra

BOTTLES

sealed bottles & measures, repurposed expired medical containers for storing concentrate chemicals for mixing 'in-the-field'. for reference; 5ml, 10ml, 70ml, 80ml, 130ml, 160ml, 170ml & 225ml. thanks to suann for her garbage contribution to the project

PHOTO-CHEMICALS

got my chems from our local film hero, KoonYik Chin. thanks for the empty bottles, they'll come in real handy when these cameras go mobile. check out Bang Bang Geng for local film & photo printing production needs, the new old school

Koon Yit (right) "it's all about promoting photography"

GRINDING; ground glass

today's attempt at making new ground glass. AHH!! broke one while sanding. 2mm piece. maybe attempt a test print with proto #1 with 210mm lense

SUPPLIES; photo printing paper

was in Singapore on personal matters, took the opportunity to get some photo supplies from my old haunt down at Peninsular Plaza. Nice to see familiar faces after more than 5 years

1. rubies :) same faces after all these years!
2. photo printing paper, ilford, not many options, better than none
3. films still readily available
4. photo chemicals, wow still some kodak powders!

1.

2.

3.

4.

Kamra #2; foldie / first print

first attempt at image capture & printing out of box. exposure is too long, light quality is very important, extremely low exposure value about minus three to minus four, which is about the luminosity of a half moon. ISO rating for the paper is about ISO 4 for easier calculations. Still puzzling, figuring out the exposure timing; according to calculations it is a sitting of 3 minutes & 20 seconds for this particular lense. more test needed. 

prototype no.2— fold camera; hello again

1. hello again, time to jump start the project again after all the commotion of the other project
2. light leak, image clear
3. good morning, i see you clearly

1.

2.

3.

ONLINE; looking for photo paper

there's no denying, yes film photography and darkroom printing is still alive! but they're dwindling, supplies and options for paper and film are not that varied or readily anymore. finding them might be a needle in a haystack, dead ends and out-dated sites, local distribution discontinued. just makes the process much more interesting.

 

 

 

8 x 10" base & framing

Master Chan pulls out from his storage a very old, super large format camera, base rails and frames, plus the accordions. His contribution to the project he said. Paid him a fee anyway for the parts. This is going to need alot of restoration and dissection. But what an interesting process it is going to be.

LENS BOARD done

Collected all 8 lens boards from Master Chan! Kanta project Prototype #1 "interchangeable" is about to be realised. 4x4" starting with pinhole 0.4mm, 1mm, 27mm, 31mm, 36mm, 41mm & *60mm (*2 pieces)

KANTA, Making of a lens board

– making of a lense, a window, cut open, torn, ripped out
– section by section, it unfolds, the steel petals peel off
– the light within, the eye that watches, it edges closer, the time is slipping, the opening
– of steel you're not, but veneer, wood with iris see you, of mixed breed you are, vest we see less we be
– and alas, the plate fits, onto this steel eye, that will set forth, the opening to the world, of a moment present, it captures, but a moment of past it will exist
– pennies for the passage, all roads paved with good intentions needs a talisman. coins are the best holder/fixtures to hold the lense plate in place

LENS BOARD

VIsit to Master Chan, a camera restorer and lens board maker. calculations and measurements with a caliper to the 50th of a millimeter! commissioning seven plates for a variation of lenses. the board will be < 4 x 4 inches (101mm) at a thickness of 1mm ± 0.5 to 1mm for felt.

 

 

 

MATERIALS

besi buruk, junk 'recycling' centres. heading to one of these this week to look for containers and fixtures, plus whatever that might come in handy with the mounting.

Prototype no.2; insides

internal framing, holder in place, this is the viewing door, need to put in ground glass plates and we're ready for test printing! but first need to work on the other prototypes too.

WOODWORK; ground glass & negative holder

from left clockwise; grooved wood strips, cut glass, 1st & 2nd attempt, the successful 3rd, the ground glass fitted on groove strips

WOODWORK; holder

woodwork; ground glass & negative holder. trying hard to make this work. been quite frustrating, the 45 degree joints are just not working. manage to work on another approach and after 2 attempts, made one good holder. at the moment figuring out mounting. another challenge!

prototype no.2— fold camera

prototype no.2— fold camera. attaching a fold camera as the lens and focusing element. this is the first prototype built, it has more framing to hold the fold camera. currently building and designing the film plane (negative holder)

WOODWORK; prototype No.4

WOODWORK; prototype No.4 this is by far the most complex build and also the biggest box camera. aproximately 11 x 14 x 20 inch W x H x D. working with unwanted wood takes alot more work and and reconstruction

MORE READING

on theories on printing, as well as some inspiration from the Lukas & Sean, the guys behind the documentation of the Afghan Box Camera, the living art form of photography